Madhavi Rubber Industries

A **rubber flange gasket** is a sealing component used to create a tight, leak-proof seal between two flanged surfaces, typically in piping or machinery systems. It's made from flexible rubber materials such as EPDM, nitrile, or silicone, designed to compress and conform to the mating surfaces when the flanges are bolted together. This helps prevent leaks of liquids, gases, or other materials under pressure. Rubber flange gaskets are commonly used in industries like plumbing, HVAC, automotive, and chemical processing due to their durability and versatility.
Key points:- **Material**: Rubber (e.g., EPDM, Nitrile, Silicone)- **Purpose**: Sealing between flanged joints- **Applications**: Piping, machinery, HVAC, automotive- **Features**: Flexible, compressible, resistant to leaks

Silicone rubber gaskets are versatile sealing components made from silicone rubber, known for its excellent flexibility, temperature resistance, and durability. Here’s a detailed overview of their features, benefits, and applications:

Key Features

1. Temperature Resistance: Silicone rubber can typically withstand a wide temperature range, from -60°C to 250°C (-76°F to 482°F), making it suitable for both high and low-temperature applications.

2. Chemical Resistance: While not as resistant as some other materials (like Viton), silicone rubber has good resistance to many chemicals, oils, and solvents, particularly in moderate concentrations.

3. Flexibility: Silicone gaskets are highly flexible, allowing them to conform well to irregular surfaces and provide effective seals.

4. Weather and UV Resistance: They are resistant to ozone, UV radiation, and extreme weather conditions, making them suitable for outdoor use.

Benefits

• Durability: Silicone gaskets have a long service life, often outlasting other rubber materials due to their resistance to aging and environmental factors.
• Non-Toxic: Food-grade silicone gaskets are available, making them suitable for applications involving food and beverages.
• Wide Range of Applications: Their versatility allows for use in various industries, including automotive, aerospace, plumbing, and manufacturing.

Common Applications

• Automotive: Used in engine seals, valve covers, and intake manifolds to prevent leaks.
• Food Industry: Employed in food processing equipment and containers due to their non-toxic properties.
• Electronics: Used as seals in devices to protect against moisture and dust ingress.
• HVAC: Found in heating and cooling systems to ensure proper sealing and efficiency.

Considerations

When selecting silicone rubber gaskets, consider:

• Material Grade: Ensure you choose the right grade (e.g., food-grade, high-temperature) based on your specific application.
• Sizing: Accurate sizing is crucial for effective sealing; refer to industry standards or specifications.
• Installation Method: Consider whether adhesive backing or compression fitting will be used for installation.

Additional Information:

• Production Capacity: 50
• Delivery Time: within 7 days of QC approval

A flat rubber gasket is a sealing component made from rubber, designed to create a tight seal between two surfaces to prevent leaks of fluids or gases. These gaskets are commonly used in various applications, including automotive, industrial machinery, plumbing, and HVAC systems.

Key Features:

1. Material: Typically made from rubber materials such as nitrile, neoprene, EPDM, or silicone, chosen based on the application's temperature and chemical compatibility requirements.
2. Design: Usually flat and may come in various shapes and sizes, depending on the specific sealing needs.
3. Thickness: Varies according to the application; thicker gaskets can absorb more irregularities in the surfaces they seal.

Common Applications:

• Automotive: Used in engine components, oil pans, and valve covers.
• Plumbing: Seals between pipes and fittings to prevent leaks.
• Industrial Equipment: Ensures tight seals in pumps, compressors, and hydraulic systems.
• Electronics: Provides moisture and dust protection for electronic enclosures.

Installation Considerations:

• Surface Preparation: Ensure that the surfaces to be sealed are clean and free of debris for optimal sealing performance.
• Compression: Proper compression is crucial; too much or too little can compromise the seal.
• Replacement: Regular inspection and timely replacement are essential to prevent leaks and maintain system efficiency.

Rubber sealing strips are versatile components used to create airtight and watertight seals in various applications, typically available in lengths of 10 to 50 meters and widths ranging from 5 mm to 50 mm.

Rubber sealing strips are designed to provide effective sealing solutions in a range of environments. Here are some key features and benefits:

Key Features

1. Material: Often made from EPDM, neoprene, or silicone, each offering varying degrees of weather resistance, flexibility, and durability.
2. Shapes and Sizes: Available in various profiles (flat, round, or square) and dimensions to fit different applications, with standard widths ranging from 5 mm to 50 mm.
3. Temperature Resistance: Typically withstand temperatures from -40°C to 120°C (-40°F to 248°F), depending on the material used.

Benefits

• Versatile Applications: Used in automotive, construction, HVAC, and industrial settings to seal doors, windows, and equipment.
• Noise and Vibration Dampening: Help reduce noise and vibration, enhancing comfort and performance.
• Easy Installation: Many sealing strips come with adhesive backing for straightforward application, eliminating the need for additional adhesives or tools.

Common Applications

• Windows and Doors: Prevent drafts and water leaks in homes and vehicles.
• HVAC Systems: Seal gaps in ductwork to improve efficiency.
• Automotive: Used in trunk lids, hoods, and doors to provide a better seal against the elements.

When selecting rubber sealing strips, consider the specific application, required dimensions, and environmental conditions to ensure optimal performance.

Extruded rubber channels are continuous profiles made from rubber through an extrusion process. They are commonly used in a variety of applications for sealing, cushioning, and protection. Here’s an overview:

Key Features:

• Custom Shapes: Available in a range of profiles (U-shaped, L-shaped, etc.) to suit different needs.
• Material Variety: Often made from materials like EPDM, silicone, neoprene, or nitrile, each offering different properties such as temperature resistance, flexibility, and chemical resistance.
• Weather Resistance: Many rubber channels are designed to withstand harsh environmental conditions, making them suitable for outdoor use.

Common Applications:

• Sealing: Used in doors, windows, and equipment to prevent water, dust, and air leaks.
• Cushioning: Provides shock absorption and vibration dampening in automotive and industrial applications.
• Edge Protection: Used to cover sharp edges or surfaces, preventing injury and damage.

Benefits:

• Easy Installation: Often designed for quick and simple installation, sometimes with adhesive backing.
• Durability: Resistant to wear and tear, prolonging the lifespan of equipment and structures.
• Customizable: Can be tailored to specific dimensions and requirements based on the application.